WINDOW TINTING

Window Tinting

Ceramic and carbon film that blocks heat, rejects UV, and stays a true neutral black for life.

What Is Automotive Window Tint?

It is not about dye anymore

Modern window tint is not about dye. The premium films we install are nano-ceramic and carbon — microscopic particles embedded in a clear polyester layer that physically block infrared heat and UV radiation while keeping your view crystal clear. The film does not need to be dark to work.

Cheap dyed tint relies on color to do the job, which is why it fades purple, bubbles at the edges, and loses most of its function in two or three Scarborough summers. Ceramic film does not work that way. The particles are part of the structure, so the film stays a true neutral black and keeps performing for the life of the vehicle.

Every Sleekz Automotive install happens in a climate-controlled bay at 37 Minford Ave, Scarborough, ON, M1R 2B4 — dust-free, temperature-stable, and ideal for clean adhesion. We follow Ontario tint law to the letter: 70% VLT minimum on the front windshield, driver, and passenger windows, with rear glass free to go as dark as you want.

99% UV Rejection

Blocks harmful UV rays that damage skin and fade your interior — leather, dash, and trim stay protected.

Infrared Heat Block

Up to 85% less heat inside the cabin. Get in, sit down, and skip the burn on hot Scarborough afternoons.

Privacy & Security

Harder to see valuables from outside, harder to be glared at — privacy without going full blackout.

No Purple Fade

Ceramic film holds its true neutral black for life. No bubbling, no haze, no cheap-tint look.

Shatter Resistance

Film helps hold the glass together in the event of an impact — an extra layer of cabin safety.

EV-Friendly

A cooler cabin means less AC load, which means more range. Tint pays itself back on every drive.

Window Tinting Packages

Three tiers, from carbon basics to flagship infrared ceramic.

Carbon Tint

A clean, durable carbon film for two-door coupes and small cars — solid heat and UV protection at a fair price.

From $380

~2 hours

Most Popular

Ceramic Pro

Our most popular tint. Full-vehicle nano-ceramic film with serious heat rejection and zero signal interference.

From $560

~3 hours

Ceramic IR Flagship

Top-tier infrared ceramic film for owners who want the absolute best in heat and UV control.

From $780

~4 hours

The Process

Four steps, one obsessive standard

01

Consultation

We walk through VLT (visible light transmission), coverage options, and Ontario legal limits so you know exactly what you are getting.

02

Preparation

Full interior glass clean, edge inspection for chips or defects, and complete cabin masking before any film touches your car.

03

Cut & Fit

Computer-cut film hand-fit to every curve of your glass. No razors on your windows, no shortcuts, no guesswork.

04

Heat Shrink & Cure

Bond the film to the glass with controlled heat, then a 48-hour cure window to lock in the finish for life.

Window Tinting FAQ

Straight Answers for Scarborough & GTA Car Owners

What's the legal tint in Ontario?

Ontario law is specific. The windshield can have a top strip only — no line-of-sight tint. Front driver and passenger windows must allow at least 70% VLT (visible light transmission). Rear side windows and the rear windshield can be tinted to any darkness you want. We will walk you through every option at consultation.

Lifetime. A quality nano-ceramic film does not purple-fade, bubble, or peel like cheap dyed tint. It is guaranteed against manufacturer defects for as long as you own the vehicle, and it keeps its true neutral black color the entire time.

No. Ceramic film is non-metallic, so cellular, GPS, Bluetooth, 407 ETR transponders, and remote starters all work cleanly through the film. Older metallic tints used to block signals — modern ceramics solved that problem completely.

Wait 48 to 72 hours after installation. The adhesive needs that time to fully cure to the glass — rolling down too early can shift the film and cause edges to lift. Park, be patient, and enjoy the result.

Yes. A certified installer can heat and peel the film cleanly without damaging your defroster lines or leaving a sticky residue. We always recommend professional removal — DIY removal is where defroster grids get destroyed.

Related Services

Complete the package

Window Tinting Near You

Serving Scarborough and surrounding GTA areas

Book Your Detail

Online Appointment Booking

We’re not taking appointments online right now. Give us a call and we’ll get you booked in, or send a request and we’ll get back to you.